80A ESC Crawler nopeudensäädin, harjallisiin moottoreihin
80A ESC Crawler nopeudensäädin, harjallisiin moottoreihin 80A ESC Crawler nopeudensäädin, harjallisiin moottoreihin 80A ESC Crawler nopeudensäädin, harjallisiin moottoreihin 80A ESC Crawler nopeudensäädin, harjallisiin moottoreihin 80A ESC Crawler nopeudensäädin, harjallisiin moottoreihin
Hobbywing

80A ESC Crawler nopeudensäädin, harjallisiin moottoreihin

64,90 €
Sisältää alv. 24.00 %
Saatavuus Varastossa

Erityisesti Crawlereille (1/10 ja 1/8) suunniteltu nopeudensäädin joissa hiiliharjallinen moottori. Sisältää myös ohjelmointikortin.

  • Vesitiivis
  • Virrankesto jatkuva 80A, hetkellinen 400A
  • Jännite 2.3S Lipo / 5-9S Nimh
  • BEC ulostulo 6,0/7,4V / 3A
  • Johdot 14AWG paksut ja 200mm pitkät
  • Virtaliitin XT-60
  • Moottoriliitintä ei ole
  • Paino 58,5g
  • Koko 36.2x31.6x17.0mm

=================


    • Special Design for 1/10th, 1/8th Crawlers
      The reliable hardware combined with powerful software (features an array of programmable parameters like start force, drag brake rate, and etc.) creates an ideal power solution to 1/10th, 1/8th rock crawlers.

      Adjustable PWM Frequency & Advanced DEO/Freewheeling Technology
      The adjustable PWM frequency combined with advanced DEO/freewheeling technology guarantees users great throttle linearity and driving feel.

      Applicable to All Weather Conditions
      The waterproof and dust-proof design allows the WP-Crawler-Brushed to be used in all weather conditions without any issue of damage caused to the ESC from water or debris.

      Excellent Braking Performance
      Hobbywing's innovative, fine-tunable drag brake rate and adjustable drag brake and brake force greatly improve the brag brake and allow users to have the excellent braking performance.

      Super Internal BEC
      The built-in switch mode BEC with a maximum output of 6A and voltage adjustable between 6V and 7.4V allows the use of various standard servos, high voltage servos and other peripherals.

      15 Programmable Parameters
      The WP-Crawler-Brushed, which features 15 programmable parameter items, is applicable to various vehicles and tracks.

      Separate Programming/Fan Port
      The separate PRG/FAN port on the ESC can power an external fan to maximize cooling performance or connect the ESC to a LED program box for ESC programming.


      A LED Program Box is Included
      A standard, dedicated LED program box (included in the box) allows users to program the WP-Crawler-Brushed easily.




      SpecificationsScale: 1/8th & 1/10thBrushed/Brushless: Brushed

      • Waterproof: Yes
      • Cont./Peak Current: 80A/400A
      • Input Voltage: 2-3S Lipo/5-9 Cell NiMH
      • BEC Output: Switch Mode: 6V/7.4V@3A
    • Wires & Connectors
      • Input Wires: Red-14AWG-200mm*1 / Black-14AWG-200mm*1
      • Output Wires: Blue-14AWG-200mm*1 / Yellow-14AWG-200mm*1
      • Input Connectors: XT60 Connectors
      • Output Connectors: No
    • (Note: All the wire length above is the original length not the length you see from the outside.)

      ESC Programing via

      • SET Button on ESC: Supported
      • LED Program Box: Supported
      • LCD Program Box: Not Supported
      • WiFi Module: Not Supported
      • Program Port: Separate Program Port
    • Firmware

      • Firmware Upgrade: Not Supported
    • Size & Weight

      • Size: 36.2x31.6x17.0mm
      • Weight: 58.5g (w/Wires)
    • Applications

      • Motors: Brushed Motor (540/550/775 size motors)
      • Vehicles: 1/8th,1/10th Rock Crawlers
    • KV Rating/T Count

      • Brushed Motor Limit with 2S LiPo/6S NiMH: ≥10T or RPM<30000@7.4V 
      • Brushed Motor Limit with 3S LiPo/9S NiMH: ≥16T or RPM<20000@7.4V


Arvostelut 0 arvostelua