12 V kenttälaturi jopa neljälle 2-4 kennoiselle lipo-akulle. Lataus tapahtuu balanseriliittimen kautta, et tarvitse erillisiä latausjohtoja.
- Käyttöjännite 11-26,1 V DC
- Matalan ja korkean jännitteen varoitus <10,9 V ja >26,5 V
- Latausteho 200 W (4 x 50 W)
- Akkutyyppi Lipo 2S, 3S ja 4S
- Valittava latausvirta 2 A, 3 A, 5 A
- Balansointivirta 400 mA/kenno
- Koko 128 x 128 x 50,5 mm
- Paino 280 g
SkyRC E4Q DC LiPo Charger
Quattro is Efficiency and Economical
Having to recharge your LiPo batteries individually in order to power your drone can be such a tedious approach because you might have to wait for many hours before they are all full.
With E4Q, 4 different cells batteries (2-4S) at the same time by the four independent ports.
Charging through Balance Port
Save you time of plugging the other cable - charging is balancing!
Powered by the most Popular XT 60 Connector
Powered by the original high-temp Nylon XT60, manufactured by AMASS, which can handle over 60A current for extended periods without exceeding 80DegC thanks to their gold-plated spring pins’ better contact surface area.
The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs.
Wide voltage range of 11v through 26.1v gives RC hobbyists more flexibility.
Buttons And Port
The e4Q multi-function charger uses four completely independent but identical circuits with a power output of 50W per power. It is designed for charging 2-4 LiPo batteries. Insert the battery into the right connector of each port, charge The appliance will also charge 4 battery times. The charging current can be adjusted by pressing the button 2A / 3A / 5A The charging capacity can show the charging current in the LED indicator through the color change.
SkyRC E4Q DC Charger:
- DC Input: 11-26.1V
- Low Voltage Alert: ≤10.9V
- High Voltage Alert: ≥26.5V
- Max. Power: 200W (4x50W)
- Battery Type: LiPo, 2S/3S/4S
- Charge Current: 2A/3A/5A (Selectable)
- Balance Current: Max. 400mA/Cell
- Size: 128 x 128 x 50.5 mm
- Net Weight：280 g